1200cc/min, EV1, Fiveo Asphalt Series, Low Impedance

High-performance, low impedance - 1200cc/min fuel injector

• These injectors are part of the new "ASPHALT" series of flow-matched, peak and hold

• Price listed is for a single (1) fuel injector

• New Viton O-rings are supplied for installation

• Custom manufactured, American-made fuel injectors

• Rated FLEX for all-fuels ; including gasoline (MTBE), E-85, all oxygenated fuels

• Complete tuning table included with matched sets

   FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
  Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
  The finished injectors are then flowed and inscribed with a control number.
  Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
  
  FLOW CHART:  sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
  As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
  Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
  The tests were performed at varying temperatures to achieve realistic results.
  Linear tuning with excellent low-end, and idle rpm.
  Fiveo is the only fuel injector seller that can claim this level of technology.
  
  SPECIAL NOTE TO OUR E85 USERS:
  Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
  Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
  It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
  This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
  It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Injector Body Design: Steel and composite plastic

Flow rates:
We use the industry standard Heptane as our testing agent.
1200 cc/min at 43.5 psi (3.0 bar)
1290 cc/min at 50.8 psi (3.5 bar)
1380 cc/min at 58.0 psi (4.0 bar)

This injector will function at rail pressures in excess of 101 PSI, 7 bar.

Excellent low pulse width response with predictable response down to 2ms.

Excellent atomization for modern multi-valve engines

This set will require no more than a 1% trim for easy tuning

Injector type: EV1

Application: Super-street and racing, naturally- and forced-aspirated engines

Fuel Delivery: Fiveo Proprietary Single Pintle

Electrical Connector: EV1, minitimer

Spray type: wide cone, maximum atomization

Length: 3 inches, 74 mm

Body Diameter: 16 mm

Orings: Top and bottom, 14.5 mm diameter

Resistance: 2.5-Ohms

3 BAR Latency: 14 volts, .0555 ms

Fuel types: Gasoline, Methanol, E85, E25, E10

We are fuel injector experts - email with your questions

All injector sets are sold with our 36 Months/Unlimited Miles Warranty