Siemens; 750 cc/min, FI-11445, 3145, Asian Import fit, NEW

This Siemens injector is set up for stock replacement for Asian Import Applications:
Mazda RX7, Mitsubishi Evo 8/9, Toyota 7MGTE/2JZ, etc.

• USE FOR HIGH HORSEPOWER ENGINES

• LIST PRICE INCLUDES:  ONE (1) FUEL INJECTOR, ONE (1) EV1 PIGTAIL

• Genuine Siemens Deka brand fuel injectors

• FLOW MATCHED SETS OF 4, 6, or 8 AVAILABLE
  

• Fiveomotorsport guarantees sets to be matched better than +/- 1.5% according to Siemens specifications

Mfg., Part number: FI 11445; Part number on injector: 3145
Flow Rate: 750 cc/min at 3 BAR
Flow Rate: 72 LBS/HR at 43.5 PSI

Resistance: 2.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: Peak 4.0 Amps/ Hold 1.5 Amps

Pressure: Min. 36 PSI (2.5 bar), Max. 87 PSI (6 bar)

Surface finish: Polished

All O-rings/Seals Included for installation.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.  
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.