Bosch 1200cc Injector, US-Car 14mm and Import 11mm

USE FOR HIGHLY MODIFIED SUPERCHARGED & TURBOCHARGED ENGINES ONLY.

CHOOSE US/EURO OR ASIAN IMPORT FIT (see photos and drop-down menu).

• LIST PRICE: ONE (1) FUEL INJECTOR;14mm,11.5mm
  Choose electrical connector from the drop-down menu
• DYNAMICALLY AND STATICALLY BALANCED AT A TRUE 1200cc/114lbs
• BRAND NEW flow-matched sets available
  
• OE FIT: 3" LONG-length
• Genuine Bosch EV14 fuel injectors
  

FLOW CHART: Each single injector or set is sold with a complete flow-data chart indicating individual fuel injector dynamic and static tested flow rates at 3.0, 3.5, and 4.0 BAR. Each set will maintain linearity throughout the test range of 15-25%, 50% and 100% duty cycle. Data also includes a complete dead time (latency) table.
Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Matched sets will never vary more than +/- 1.0%

Excellent low pulse width response with predictable response.
Excellent fuel atomization for modern multi-valve engines.
This set will require no more than a 1% trim for easy tuning.

Injector type: EV-14, saturated
Spray Nozzle: Single-hole ball/disc with a wide-cone spray pattern for maximum fuel atomization (see photo).
Flow rates:
1200 cc/min - 3.0 BAR
1308 cc/min - 3.5 BAR
1416 cc/min - 4.0 BAR
Complete static and dynamic flow information included with each set.
Dead Time: 0.921 ms at 14 volts
Coil Resistance: 12.5 Ohms

Dimensions:
Overall Length: 3.0 inches, 74.5 mm
O-ring to o-ring: 2.50 inches, 64 mm
Injector body diameter: 0.60 inches, 15 mm
O-rings: Viton, top and bottom

Electrical connector type: U.S. CAR