JEEP - 30lb, 36lb, Fuel Injectors & 340 lph Fuel Pump

Use Fuel Injector/Pump Bundles for MODIFIED ENGINES ONLY -

Jeep 4.0, 3.8, inline 6 cylinder.
Wrangler, Cherokee, Rubicon, Sport,

LIST PRICES INCLUDES COMPLETE SET WITH FUEL PUMP.

Injector Body Design: EV6, black composite plastic.

Injector type: EV6, saturated

Fuel Nozzle: Dual-hole disc, split-fountain - maximum atomization

Flow rate: 30lbs/hr and 36lbs/hr at 43.5 PSI

Resistance: 14.2 Ohms

Electrical connector type: U.S. CAR

Length: 3 inches, 74 mm

Body Diameter: 19 mm

Orings: Viton, Top and bottom, 14.5 mm diameter

 FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.

The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.

Use for modified, supercharged/turbocharged and naturally aspirated engines.

Avenger 340 lph fuel pump, In tank, All-Fuels
Tech Data: 
Fiveomotorsport's In-Tank Fuel Pump Series features superior flow throughout a wide pressure range. 

At 40 psi our 00042 pump boasts more than 341.33 ltr/hr (90.1 g/hr). This pump is ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the original equipment (OEM) configuration. The Fiveo's In-Tank Pump Series is also perfect for use as a universal replacement for applications that require more flow to support forced air power-adders such as turbo and supercharged applications.

Fiveo's In-Tank Series are high-output, electric fuel pumps that fits most popular EFI applications.
Compact, lightweight pumps that bolts into many existing OEM hanger assemblies.

RATED FOR E85, Gasoline (MTBE additive)
00042 340 lph PUMP FEATURES A STRAIGHT-THROUGH, INLET TO OUTLET.

• P/N - 00042
• Fits most vehicles where popular aftermarket pumps are applicable
• Includes installation kit with filter
• Designed for in-tank use only
• Can be used in Carburetor and EFI applications
• Turbine pump mechanism increases durability and can be used in pulse modulated applications.

Fuel Pump Specs:
Applications: All applications that use the GSS342
Condition: Hermetically sealed, all components brand-new
Usage: In-tank using stock housing
Fuel Flow: 341.33 ltr/hr, 90.1 gal/hr
Version: High Pressure
Installation Kit Included: Yes
MIN Voltage: 12V
Operating Pressure: 0-120 psi determined by fuel pressure regulator

Fuel Pump Dimensions:
4.75" - 120mm, Inlet tip to outlet tip
3.125" - 80mm, Metal case only
1.650" - 42mm,  Diameter
Inlet width: 5/15" - 8mm - (See photos).
Outlet width: 5/16" - 8mm